Using bag type or
electric bag composite dust collector (including bag area of electric bag
composite dust collector, which is called bag filter/dust collector bag house),
is one of the main means to solve the discharge of flue dust in the kiln. The dust collector filter bag is the core
component of bag filter, and its quality and performance determine the
operation effect, service life and economy of bag filter. Therefore, it is the
focus of cement production enterprises to compare the performance of various
kinds of filter bag materials and
select the filter bag with higher cost performance.
Because of the
difference of cement production process, the difference of smoke and dust
properties, the difference of operation management level, the use conditions of
filter bag vary greatly, it is difficult to compare the performance of various
filter bags in actual engineering. Therefore, Shanghai Indro Industry Co., Ltd
chooses the four kinds of filter bags materials used in cement kiln to compare
the performance and technology in laboratory. The purpose is to guide the users
to choose the baghouse filter bags
with higher cost performance, reduce the blindness and randomness of the
selection, and meet the requirements of high filtration efficiency, low
operation resistance, energy saving and long service life.
For this purpose, as
one professional filter bag and materials manufacturer, SIIC(Shanghai Indro
Industry) engineers select four kinds of materials to compare and test from the
performance: such as woven fiberglass with ptfe membrane, fiberglass felt, P84
needle felt (PI) and SIIC special cement kiln filter material-composite filter felt.
1,
woven glass fiber media/cloth with ptfe membrane
On the surface of
glass fiber filter material, a microporous film is formed, and it is densely
attached to the surface of glass fiber base material, so as to give full play
to the role of the ptfe lamination, and improve the water resistance, oil
resistance, corrosion resistance and air permeability of the filter material.
Improve the performance of glass fiber filter material.
2,
fiberglass needle felt filter material
It is belongs to the
nonwovens, at present needle felt filter class are commonly used in the fabric
on the basis of the fluffy and no fiber net strength by forming, and go through
a complex process, the needle filter in fiber staggered three-dimensional
structure, this structure is conducive to the formation of a dust layer,
filtering and after cleaning does not exist through the gap, the filtering
effect is stable.
3,
P84 fiber filter material
P84 is the trade
name, scientific name polyimide, abbreviated PI.
It is a high
technology, organic polymer material. The P84 fiber cross section has three
leaves and has very high fiber surface area coefficient. Compared with other
fibers with different shapes, the fiber has the characteristics of large
specific surface area, small porosity and large porosity. In addition, P84
fiber filter material can be used continuously under 260 degrees Celsius, the
instantaneous temperature can reach 280 degrees, with high filtration
efficiency, low running resistance, long service life.
4,
SIIC special cement kiln filter material-composite filter felt
It is belongs to the
nonwoven composite filter material, using high performance aramid fiber as the
main raw material, filling a certain proportion of P84 fiber, PTFE filament fabric as the support
structure, absorbing the "three-dimensional asymmetric structure" and
"micro hole" design, the filter material can be comparable with the 100%
P84 filter material, has the advantages of high efficiency, low resistance,
long life.
Dust
collector and baghouse filter bags materials for cement kiln:
To help the users to
choose the baghouse filter bags with
higher cost performance, SIIC engineer chooses the four kinds of filter bags materials
used in cement kiln to compare the performance: woven fiberglass with ptfe
membrane, fiberglass felt, P84 needle felt (PI) and SIIC special cement kiln filter material-composite
filter felt.
没有评论:
发表评论