How much do you know about PP pleated filter cartridge?

How much do you know about PP pleated filter cartridge?

PP pleated filter cartridge is made of pleated polypropylene membrane, polypropylene non-woven fabrics and polypropylene cage. During the production, it is purity, free of surfactants, resins, binders and adhesives. It can be used for the liquid and gas prefiltration and clarification.

SIIC-M025 from Shanghai Indro Industry Co., Ltd is special machines for making PP pleated filter cartridges, it is complete pleated filter cartridge production line, including pleats making, pleats length cutting, middle seam welding, cap welding, fitting end welding and length connector welding.

- Features and Benefits

100% high quality polypropylene material;
Wide chemical compatibility
High flow rate
Low differential pressure
High dirt holding capacity
High nominal filtration precision
Long using life
Economical choice for the prefiltration and guard filtration before critical filtration
Board range of micron ratings
Suitable for various filtration.
Meet the current FDA after cleaned and flushed with Pyrogen-free water.
- Micron Rating（µm）:
0.10   0.20   0.45   1.00   3.00   5.00    10.0   20.0   40.0   50.0  100

-Typical Applications

1. Pharmaceuticals, APIs, Biologics; Solvent; Compressed air filtration;
2. Plating solutions, Ink;
3. Fine Chemicals;
4. Food & Beverages, Wine, Beer, Mineral Water;
5. Semi-Conductor, LCD Display, Discs, R.O. prefiltration
6. Clarification of waste water treatment.

- Materials of Construction

Filter Media: Polypropylene
Support Layer: Polypropylene
Inner Core: Polypropylene
Outer Core: Polypropylene

-Cartridge Dimensions

Outer Diameter: 68mm
Inner Diameter: 33mm
Effective Filtration Area: ≥0.60m2

-Operation Conditions

Normal Operating Temperature: ≤55℃
Max. Operating Temperature: 80℃(△P≤0.10Mpa)
Max. Differential Pressure:  Normal Flow direction：4.2 bar at 25℃
                                     Reverse Flow direction: 2.1 bar at 25℃
Steam Sterilization for 30 minutes at 121±2℃
PH Value compatibility: 1-13

-Cartridge Safety

Endotoxin: ＜0.25 EU/ml
Extractable: 0.03g/10”   

-Production process of PP pleated filter cartridges

The complete pleated filter cartridge production process includes pleats making, pleats length cutting, middle seam welding, cap welding, fitting end welding and length connector welding. SIIC-M025 from Shanghai Indro Industry Co., Ltd is special machines and production line for making PP pleated filter cartridges.

How much do you know about nylon pleated filter cartridges?

Nylon pleated filter cartridge is made of pleated nylon membrane, polypropylene non-woven fabrics and polypropylene cage. During the production, it is purity, free of surfactants, resins, binders and adhesives. It can be used for the liquid and solvent clarification and critical filtration.
SIIC-M025 from Shanghai Indro Industry Co., Ltd is the special machines, special nylon pleated filter cartridges production line, including pleats making, pleats length cutting, middle seam welding, cap welding, fitting end welding, length connector welding.

- Features and Benefits

Naturally hydrophilic Nylon membrane for sterile filtration
Wide Chemical resistant to alkaline solutions and organic solvents
Especially suitable for filtering alkaline, but high adsorbance of protein
100% integrity test; Meet FDA standard
-Micron Rating（µm）:  0.10    0.20    0.45    0.65    1.00    3.00

-Typical Applications

1. Pharmaceuticals, APIs, Biologics; Solvent;
2. Ultrapure water and disk, display, multi silicon process water in Electronics;
3. Food & Beverages, Wine, Beer, Mineral Water;
4. Fine chemicals, especially ketone, ester, ether;

- Materials of Construction

Filter Media: Nylon
Support Layer: Polypropylene
Inner Core: Polypropylene/Stainless Steel
Outer Core: Polypropylene

-Cartridge Dimensions

Outer Diameter: 69mm
Inner Diameter: 33mm
Effective Filtration Area: ≥0.65m2

-Operation Conditions

Normal Operating Temperature: ≤60℃
Max. Operating Temperature: 80℃(△P≤0.10Mpa)
Max. Differential Pressure:  Normal Flow direction：4.2 bar at 25℃
Reverse Flow direction: 2.1 bar at 25℃
Steam Sterilization for 30 minutes at 121±2℃
PH Value compatibility: 6-13

-Cartridge Safety

Endotoxin: ＜0.25 EU/ml
Extractable: 0.03g/10”

-Nylon pleated filter cartridge production process:

The nylon pleated filter cartridge production process includes: pleats making, pleats length cutting, middle seam welding, cap welding, fitting end welding and length connector welding, SIIC-M025 from Shanghai Indro Industry Co., Ltd is the special nylon pleated filter cartridges production line.

How much do you know about Glass Fiber Pleated Filter Cartridge?

How much do you know about Glass Fiber Pleated Filter Cartridge?

Glass Fiber pleated filter cartridge is made of glass fiber membrane, polypropylene non-woven fabrics and polypropylene cage. During the production, it is purity, free of surfactants, resins, binders and adhesives. It can be used for the liquid and gas prefiltration and clarification.

SIIC-M025 from Shanghai Indro Industry Co., Ltd is special fiberglass pleated filter cartridge production lines, including pleating machines, length cutting machines, cap welding machine, fitting end and length connector welders.

- Features and Benefits

1. Superfine glass fiber
2. High dirt holding capacity, excellent flow performance and longer service life;
3. Suitable for the removal of colloids, lipids, protein aggregates and particles;
4. Good oil resistance, wide chemical compatibility;
5. Economical and ideal choice for the prefiltration and guard filtration before critical filtration
- Micron Rating（µm）: 0.45   1.00     3.00    5.00     10.0     20.0   30.0

- Typical Applications

1. Clarification of wine, spirits, fruit juices, soft drinks or other beverages;
2. Serum and blood prefiltration
3. Colloids and viscous contaminants removal in pharmaceuticals, as vaccines, culture medias, etc.
4. Cell culture fluids after cell harvest

-Materials of Construction

Filter Media: Glass Microfiber
Support Layer: Polypropylene
Inner Core: Polypropylene/Stainless Steel
Outer Core: Polypropylene

-Cartridge Dimensions

Outer Diameter: 69mm
Inner Diameter: 33mm
Effective Filtration Area: ≥0.50m2

-Operation Conditions

Normal Operating Temperature: ≤60℃
Max. Operating Temperature: 85℃(△P≤0.10Mpa)
Max. Differential Pressure:  Normal Flow direction：4.2 bar at 25℃
Reverse Flow direction: 2.1 bar at 25℃
Steam Sterilization for 30 minutes at 121±2℃
PH Value compatibility: 1-13

-Cartridge Safety

Endotoxin: ＜0.25 EU/ml
Extractable: 0.03g/10”

-Production process:

The complete making process includes: pleat making, pleats length cutting, middle seam welding, cap welding, fitting end welding, and length connector welding. SIIC-M025 from Shanghai Indro Industry Co., Ltd is special fiberglass pleated filter cartridge production lines, including pleating machines, length cutting machines, cap welding machine, fitting end and length connector welders.

How much do you know about PES PLEATED FILTER CARTRIDGE?

PES pleated filter cartridge is made of pleated polyethersulfone membrane, polypropylene non-woven fabrics and polypropylene cage. During the production, it is purity, free of surfactants, resins, binders and adhesives. It can be used for the liquid critical filtration.

SIIC-M025 from SHANGHAI INDRO INDUSTRY CO., LTD is the professional production line, machines for making PES pleated filter cartridges for liquid filtration.

-Features and Benefits

Polyethersulfone membrane provides high dirt holding capacity.
Hydrophilic membrane with geometrically unique pores
High flow rate
Lower protein binding, super chemical tolerance and thermal stability
Filtration effective is up to 99.9999%
Ideal materials for critical filtration
All products have passed 100% integrity testing.
Meet the current FDA standard.
Clean and flushed with Pyrogen-free water. Rinse up to 17-18 Ω
Meet the requirements of electronic industry.
-Micron Rating（µm）: 0.04   0.10   0.20    0.45   0.65    0.80    1.20

-Typical Applications

1. API, LPV, blood serum, biologicals, buffers and other pharmaceuticals;
2. Ultrapure water and disk, display, multi silicon process water in electronic;
3. Sterile Filtration of Food & Beverages, Wine, Beer, Mineral Water;
5. Fine Chemicals
-Materials of Construction

Filter Media:  Polyethersulfone
Support Layer: Polypropylene
Inner Core: Polypropylene
Outer Core: Polypropylene

-Cartridge Dimensions

Outer Diameter: 68mm
Inner Diameter: 33mm
Effective Filtration Area: ≥0.60m2
Length: 2.5”~40”

-Operation Conditions

Normal Operating Temperature: ≤60℃
Max. Operating Temperature: 80℃(△P≤0.10Mpa)
Max. Differential Pressure:  Normal Flow direction：4.2 bar at 25℃
Reverse Flow direction: 2.1 bar at 25℃
Steam Sterilization for 30 minutes at 121±2℃
PH Value compatibility: 2-13

-Cartridge Safety

Endotoxin: ＜0.25 EU/ml
Extractable: 0.03g/10”

About PES pleated filter cartridges production process:

Pleats making-pleats length cutting-middle seam welder-pleats installation-cap welder-fitting end welder-length connector welder, SIIC-M025 from SHANGHAI INDRO INDUSTRY CO., LTD is the professional production line, machines for making PES pleated filter cartridges for liquid filtration.

Pleated filter cartridge making process-shared from SHANGHAI INDRO

As one professional manufacturer and supplier of liquid filtration pleated filter cartridge making machine, SIIC team is glad to share with you about pleated filter cartridges making process as followings:

-Making cartridge pleats: Using filter paper pleating machine to make filter cartridges pleats

-Length cutter/controller: Using filter cartridge length cutter to cut/trim off the pleats.

-Welding middle seam: Using middle seam welder to do middle seam thermal welding of filter cartridges paper

-Cartridge shaping: Putting filter membrane with correct length into the outer cage (plastic shell) with inner core inside of the membrane to keep pleated filter cartridge have initial shape.

-End cap welding: Using cap welder to welding cap onto both ends of filter cartridges

-Fitting end welding: using pleated filter cartridge fitting end welder to weld different types of fitting ends together with both ends of pleated cartridges and form one complete piece of pleated filter cartridges. The different ends types include: flat cover, fin, DOE215/220/222/226, M20/30 thread and other.

-Length jointing/connecting: for 20”/30”/40” long pleated filter cartridges, normally using pleated filter cartridge length connecting welder to weld  2/3/4 pieces of 10” pieces together to complete 20”/30”/40” long pleated filter cartridges.

Video list:

1.    making cartridge pleats

2.      cartridge pleats length cutting

3.      welding middle seam

4.      cartridge cap welding

5.      cartridge fitting end welding

6. cartridge length connector welding